Cisco 350-601 Exam Dumps

A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?

A. Cisco IMC
B. Adapter
C. I/O module
D. BIOS

Answer: C

An engineer needs to connect Cisco UCS Manager to an external storage array. Due to budget limitations, the engineer must connect a Cisco UCS manager directly to an FC storage port. Which two actions must be taken to complete this connection? (Choose two)

A. Configure the fabric interconnect in FC switch mode
B. Create a storage connection policy
C. Set FC zoning to disabled when creating the VSAN
D. Configure the fabric interconnect in end host mode
E. Create the required VSAN in the SAN cloud

Answer: A,C

Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:•Two-factor authentication must be enabled for all UCS user authentication.•All AAA packets must be encrypted and use TCP port 49 to establish communication.Which set of actions needs these requirements?

A. Create the LDAP provider.Change the LDAP group rule in an LDAP provider.
B. Create the RADIUS group mapping.Change the RADIUS group rule in a RADIUS provider.
C. Remove the LDAP provider.Create a TACACS+ provider in user management.
D. Delete the LDAP group mapping.Create a RADIUS provider in user management.

Answer: C

An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration. The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?

A. SNMP
B. Telnet
C. SSH
D. HTTPS

Answer: C

What is a characteristic of the install all command on the cisco Nexus series switch?

A. Upgrades only certain modules
B. Automatically checks the image integrity
C. Impact data plan traffic
D. Continues the upgrade process if any step in the sequence fails 

Answer: B

An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

A. write
B. verify
C. commit
D. checkpoint
E. apply

Answer: B,C

A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal? (Choose two.)

A. Auto-learning
B. Port security
C. Enhanced zoning
D. Device aliases
E. Smart aliases

Answer: A,B

A network administrator attempts to automate the provisioning of several new Cisco Nexus switches. The administrator prepares a bootstrap configuration script for the task Due to the number of switches a zero-touch provisioning solution is preferred Additionally, some switches arrive with outdated software and should be automatically upgraded as part of the provisioning workflow Which solution meets the requirements’

A. DHCP
B. Ansible
C. NX-API
D. POAP

Answer: C

A network engineer is deploying a cisco ALL-flash hyperflex solution. Which local storage configuration is required for the operating system and persistent logging?

A. Two solid state drives
B. Two SATA drives
C. One SATA drive
D. One solid state drive

Answer: D

An engineer must implement protection against ICMP DoS attacks on a Cisco Nexus 9000 Series Switch. The requirement is to rate-limit ICMP without denying all other ICMP traffic. The ICMP trafic currently passing through the Cisco Nexus 9000 device must not be affected. Which configuration accomplishes these goals?

A. Configure SNMP traps to send the ICMP notification if the CPU utilization is more than 90%.
B. Reconfigure the Layer 3 interfaces to be in the non-default VRF and ICMP broadcast storm control
C. Create an access list to deny ICMP traffic and apply it to all interlaces in the inside direction.
D. Apply a control plane service policy that matches all ICMP traffic to drop the traffic fiat exceeds the threshold.

Answer: D

An engineer is deploying a VXLAN EVPN environment for a customer. The customers environment suffers from a large amount of flooding related to hosts attempting to resolve the MAC to IP mapping on the network segment. Which feature prevents this issue from happening in the future?

A. anycast rendezvous point
B. anycast gateway
C. IP ARP SYNC
D. IP ARP suppression

Answer: D

A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog. Which solution meets these requirements?

A. Cisco UCS Director
B. Cisco Intersight
C. Cisco Data Center Network Manager
D. Cisco Workload Optimization Manager

Answer: C

An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning. When creating a solution, the engineer must keep in mind that the tool must support these requirements:uk.co.certification.simulator.questionpool.PList@11e872a0Which automation tool meets these requirements?

A. YAML
B. Chef
C. SaltStack
D. Python

Answer: B

Which communication method does NFS use for requests between servers and clients? 

A. XDR
B. SSC
C. PRC
D. SMB

Answer: C

The EPLD update of the supervisor module has been scheduled for several cisco MDS 9000 switches. What will be the impact of the update?

A. All control plane traffic is stopped for the duration of the EPLD update and the switch remain operational for the duration of the upgrade.
B. The redundant supervisor lakes over while the EPLD update is in progress and there is no service disruption.
C. All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed.
D. The redundant supervisor lakes while the EPLD update is in progress and the switch is rebooted after the upgrade is completed.

Answer: C

An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch The switch must automatically receive its software image and configuration file upon power-on. Also, only UDP is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images Which set of actions completes the configuration’

A. Enable option 67. Define TFTP transfer protocol
B. Enable option 43 Define HTTP transfer protocol.
C. Enable option 46. Define TFTP transfer protocol
D. Enable option 35. Define HTTP transfer protocol.

Answer: A

An engineer must implement a VXLAN-based data center interconnect. The long-distance transport provided by a service provider is IP-based,supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be take to build the data center interconnect?

A. Configure a route map to associate the IPs of the remote VTEPs.
B. Create an IP access list and associate it with VNI to replicate traffic to remote VTEPs.
C. Announce host reachability over BGP.
D. Implement BGP EVPN ingress replication.

Answer: D

After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced. Which two actions must be taken to meet this requirement before the isolated device is reloaded'? (Choose two)

A. Set the vPC MAC address to a tower value than the peer
B. Change the vPC system-priority of the replacement chassis to a higher value than the peer if.
C. Change the vPC system-priority of the replacement chassis to a lower value than the peer.
D. Set the vPC MAC address to a higher value than the peer
E. Configure auto-recovery to the disable state on both peers

Answer: B,E

Due to a newly announced security advisory, a company has been Informed that they must update the configuration of 500 network devices that ate deployed n their network. The engineering team must assist the operations team to prepare for this update. The operations team does not have direct access to the network devices and must log in via a Linux server. This Is the first time that the team is making a network-wide configuration and must change all devices without first installing additional software on the network devices. The operations team is unfamiliar with automation and scripting technologies. Which automation tool must be used to accomplish this goal?

A. Chef
B. Ansible
C. Puppet
D. Saltstack

Answer: B

Which protocol does Cisco Hyperflex use to share data among nodes in a VMware vSphere environment?

A. CIFS
B. FCoE
C. SMB
D. NFS

Answer: D

An engineer must configure a Cisco UCS domain for monitoring and management by the Cisco Intersight SaaS platform. After the setup is complete, administrators must have full control to configure the device through Cisco UCS Manager and Intersight. Which set of actions accomplishes this task?

A. Configure Devce Connector Access Mode as Allow Control in Device Console Claim the device on Intersight as UCSM Managed Mode.
B. Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersightc as Intersight Managed Mode
C. Configure Device Connector Access Moao as Allow Control in Device Console. Claim the device on intersight as Intersight Managed Mode
D. Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersight as UCSM Managed Mode 

Answer: C

The Cisco UCS blade chassis must send SNMPv3 traps to a network monitoring system. The SNMP trap messages should be authenticated and have protection from closure. Which SNMP security privileged level should be configured?

A. noPriv
B. auth
C. noAuth
D. priv

Answer: D

An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link Which load balancing method should be used to accomplish this goal?

A. src-id/dst-id  
B. src-dst-oui  
C. src-dst-port  
D. src-id/dst-id/oxid  

Answer: D

Which storage solution operates at the file level and contains its native lightweight operating system on simplified hardware?

A. NAS
B. SAN
C. unfield fabric
D. standard file server

Answer: A

An engineer requires the Cisco Fabric Services to distribute NTP configuration only to the members within the scope of a VSAN that belongs to a Cisco Unified Network. Which scope distribution must be selected to meet this requirement?

A. Logical scope  
B. Physical scope  
C. Uncoordinated scope  
D. Coordinated scope  

Answer: A

An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal? 

A. Enable the system to boot with the configured boot order.  
B. Set the boot configuration directly through BIOS.  
C. Configure the legacy and precision boot order to be mutually exclusive.  
D. Apply UEFI Secure Boot for a nonsupported operating system.  

Answer: A

An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a part of the design the server must perform an iSCSI bool from the storage array Which configuration must be performed in the SAN settings in the root organization to satisfy that condition?

A. Implement a WWPN pool  
B. Create a virtual iSCSI vNIC  
C. Enable a host SAN pool  
D. Create an IQN suffix pool  

Answer: D

An engineer must implement a new VRF that permits communication between all endpoint groups (EPGs) by default. The new EPGs and bridge domains (BDs) that are created in the new VRF must not require additional configuration to permit traffic between the newly created EPGs or BDs. Which action accomplishes this goal’

A. Provide and consume a permit any contract on the VRF level
B. Create a VRF in the common tenant.
C. Place all EPGs in the preferred group.
D. Implement a global contract.

Answer: C

An engineer must configuration a backup and restore of Cisco UCS Manager during the weekend maintenance windows. The configuration must be restored to its original state on Monday morning. The end users can make changes only to the Service Profile configuration. Which set of actions meets these requirements?

A. Schedule a system backup to run at the start of every weekend and manually import the backup on Monday morning.
B. Schedule a system backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning
C. Schedule a logical backup to run at the start of every weekend and manually import the backup on Monday morning.
D. Schedule a logical backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.

Answer: B

An engineer must migrate a Cisco UCS C-Series server from Cisco SingleConnect to direct integration mode. The Cisco UCS Manager Rack Server Discovery Policy and Rack Management Connection Policy are set to immediate and Auto-Acknowledge. Which set of steps accomplishes this task?

A. Disconnect the cables from the EFX.Connect the cables to appliance ports on the fabric interconnectReset the Cisco IMC of the server.
B. Disconnect the cables from the FEX.Connect the cables to server ports on the fabric interconnectReset the Cisco IMC of the server.
C. Disconnect the cables from the FEX.Connect the cables to appliance ports on the fabric interconnectReacknowledge the sever
D. Disconnect the cables from the FEX.Connect the cables to server ports on the fabric interconnectReadKnowledge the server.

Answer: D

Which component is excluded by default from the host firmware package?

A. network interface controller
B. board controller
C. storage controller
D. local disk

Answer: D

A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:•The customer's security requirements mandate the use of SSH transport. •No extra software must be installed on the managed systems. •The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.Which solution meets these requirements?  

A. PowerShell  
B. Ansible  
C. Chef  
D. Puppet  

Answer: B